Netstal utilise EnviroStart sur de nouvelles machines de moulage à injection pour l'industrie pharmaceutique pour Tech Group à Dublin

25/05/03

Netstal, one of Europe's leading injection moulding equipment manufacturers, have five Synergy model systems at Tech Group in Dublin to be used in the manufacture of high integrity packages for the pharmaceutical industry.

The Synergy machines were selected because of their ability to meet the rigorous demands of the industry into which the final products are to be shipped and the EnviroStart was selected as the motor energy control of choice following extensive proving and trials at the Tech Group premises. Each of the machines has been fitted with an EMS (European) 400-TPMEC-30. The installation of the motor energy control at the point of manufacture of the total system has reduced costs to Tech Group not only because the Star-Delta contactor's typically used on the drive motors were no longer required but also because the wiring was much simplified. Additionally of course, in service, the motor energy control maintains the kW consumption of the motor at an optimum level thereby reducing running costs for the total system.

Les économies qui peuvent être réalisées sur les machines de moulage par injection dépendent des cycles de travail et de la taille du moteur par rapport à la charge maximale au moment de la fermeture du moule. Mais dans les tests réalisés à ce jour dans le groupe Tech, des économies moyennes de plus de 20 % ont été atteintes.

Pour plus d’informations concernant la gamme des Economiseurs d'Energie, voir la page Economiseur d’Energie.

Pour plus d’informations sur Netstal, cliquez ici.

Pour plus d’informations concernant Tech Group, y compris les détails du contrat pour lequel ces machines ont été achetées auprès de Netstal, cliquez ici.